|
Name: |
BattleWing V3.8 - ARF
Flyingelectric.com Jason Jones
Special
|
|
Picture: |
.jpg)
Click here for
larger picture |
 |
|
|
Mike Bowns (Left) and Jason Jones
(Right).
Jason
from
Flyingelectric.com in South Carloina was in town (San Jose, California)
so we meet up for
lunch, 1/27/2011.
I gave Jason some big & small vinyl stickers
for his trailer along
with some wing cores.
Picture taken at the hotel UPS store. |
|
| Version: |
Version
3.8 with Magnetic Fins |
| Price: |
$140
3 planes maximum per order
to retain the $10 shipping cost.
If more than 3 then please e-mail for more shipping options
a shipping will go up.
|
| Purchase: |
|
| Status |
Please view waiting list for availablity on
main product list before ordering.
Click Here
|
| Foam Type: |
EPP 1.9lbs Foam |
Aileron
Color: |
BLACK Yellow Red
Blue |
|
Build: |
Assembled
ARF (Almost Ready to Fly), just add receiver. |
|
Type: |
Combat |
|
Description: |
Do you have money to burn? Do all the ladies
think you're handsome? Now that I have you
attention let me introduce you to the BattleWing
ARF. A fully built combat airplane wing almost ready to fly
(ARF) right out of the box, just add your receiver.
Don't worry about the electronics connection or
whether its setup properly or not... Why?
Because it's been fully tested so there's no
worries!
-----------------
If you somehow damage your plane beyond your
repairing capabilities, ship your BattleWing
back to me and I will do a full repair on your
wing for free. |
|
Dimension: |
10 oz
Wingspan: 31" |
| Parts
Included: |
- Core wing (white)
- Routed battery bay
- Routed servo bay
- Routed receiver/ESC bay
- Bulk head support piece
-----------------------------
- Velcro strap for battery
- Wood engine mount
- Wing tips (Fins) + 1 extra tip (one
side only, top and bottom)
- Ailerons (covered in
black ultracoat)
- Servo horns for aileron
-----------------------------
- Control rods
- Reinforced mid wing support
-----------------------------
- 2 x 9 Gram servos
(Hextronix)
- 1 x 12A Turnigy ESC(Electronic Speed
Controller)
- 2 x 1000mah Lipo Batteries
- 2 x 5inch propellers
- 1 x 25g brushless outrunner motor
(3000kv) Modified prop saver
- 5 x prop savers
rubber bands
(surgical tubing)
- All items mounted and tested
|
| Parts/>
Needed: |
- Transmitter
- Receiver
- Battery Charger
|
|
.jpg)